Till innehåll på sidan
Till KTH:s startsida

Examensarbeten

Examensarbeten

[1]
A. Lindgren och E. Wernström, "Automated design and optimization of reinforced concrete deep beams," , 2024.
[2]
J. Guo och C. Lei, "Computational modeling of crack flows in a hydropower stilling basin," , 2024.
[3]
E. Kolmodin och K. Kubiak, "Effects of Impulse Intensity and Boundary Conditions for Blast-Loaded Reinforced Concrete Beams," , 2024.
[4]
L. Mujakic och R. Nilsson Malmqvist, "Ice Loads on Concrete Buttress Dams : Data-driven and numerical analysis of important parameters," , 2024.
[5]
L. Lind och W. Toftgård, "Impact from cross-valley inclination on the sliding stability of concrete buttress dams," , 2024.
[6]
K. Tajik, "In-plane Performance of Lightweight Concrete Blocks Reinforced with Different Methods," , 2024.
[7]
R. A. Alkurdi och M. Hussein, "Interaction effects during internal explosions in reinforced concrete frame structures," , 2024.
[8]
N. Löfman och V. Molander, "Investigation of Reinforced Autoclaved Aerated Concrete Structures," , 2024.
[9]
O. Linde, "Limiting Thermal Cracking in Concrete During Hydration : A Numerical Analysis," , 2024.
[10]
J. Ismaeel och T. Haddad, "Numerical assessment of cracked concrete structures : Influence of pre-existing cracks," , 2024.
[11]
E. Ceberg och E. Holm, "Numerical Simulations of Impact-Loaded Reinforced Concrete Beams," , 2024.
[12]
J. Liski, "Paltning av bergbultar och dess mekaniska inverkan," , 2024.
[13]
A. Renau Rubio, "Safety considerationsintheoperationof flap-gate spillwaysfordischargingice and floatingdebris," , 2024.
[14]
E. Isberg, "CFD-modeling of labyrinth weir flood discharge with ice cover," , 2023.
[15]
D. Attia och S. Kiryakos, "Climate improved concrete structures : Possibilities in design and construction," , 2023.
[16]
J. Abdalnour och M. Saliba, "Drop-weight impact tests on reinforced concrete beams," , 2023.
[17]
S. Hardo och D. Maher, "Extreme renovation of concrete buildings," , 2023.
[18]
A. Al-Bazarkan och H. Alahmad, "Loading tests on composite concrete columns : A comparison between composite columns made of permanent 3DPC formwork filled with SCC and columns made of homogenous SCC," , 2023.
[19]
R. Haj Hussein och W. Ali Abdulhadi, "Swedish Concrete Roads : Performance, Damages and Rehabilitation 10-30 Years after Construction," , 2023.
[20]
D. Uludag, "The Effect of Chloride-Induced Corrosion Patterns on the Crack Width of Reinforced Concrete," , 2023.
[21]
A. Lindblom och E. Ånger, "Assessment of ice loads on piled structures based on local conditions," , 2022.
[22]
S. Dal och S. Raheb Khalo, "CLIMATE-SMART CONCRETE APPLIED ON A SLAB FRAME BRIDGE," , 2022.
[23]
E. Brodd och L. Östlund, "Environmental and technical evaluation of cement reduction and test methods for fibre reinforced shotcrete in tunnels," , 2022.
[24]
E. Brodd och L. Östlund, "Environmental and technical evaluation of cement reduction and test methods for fibre reinforced shotcrete in tunnels," , 2022.
[25]
S. Anand, "EVALUATION OF ENVIRONMENTAL AND TECHNICAL PERFORMANCE OF ALTERNATE FIBRES FOR SHOTCRETE IN TUNNELS," , 2022.
[26]
E. Osmic, "Frost prediction in heat exchangers : The influence of relative humidity and outdoor temperature on frost formation in plate heat exchangers," , 2022.
[27]
C. Youssef och M. Basilious, "Global Analysis of a Tall Timber- Concrete Hybrid Structure Subjected to Wind Load : A Parametric Study of Different Hybrid Solutions," , 2022.
[28]
A. Göthlin och S. Larsson, "Jämförelse av trä och betong i ett flerbostadshus," , 2022.
[29]
J. Alexandersson, "Life Cycle Cost Analysis of two high temperature cooling systems supplied by geothermal energy : A Case Study in Sant-Cugat, Spain," , 2022.
[30]
R. Durand, "Low-carbon concretes in infrastructures : Applicability, potential and carbon footprint focusing on the Parisian Metro Line L18," , 2022.
[31]
M. Abdi och D. Ntzimanis, "Numerical simulations of pore pressure on concrete buttress dams," , 2022.
[32]
G. L'Hostis, "On the usage of calcined clays in the French construction industry," , 2022.
[33]
J. Tattari, "Optimized design of a load transfer concrete slab," , 2022.
[34]
A. Mansour, "Praktisk tillämpning av klimatförbättrad betong : Litteraturstudie, observationsstudie och dokumentanalys," , 2022.
[35]
D. Andersson, "Shear Failure of Steel Fiber and Bar Reinforced Concrete Beams Without Stirrups : Predictions based on Nonlinear Finite Element Analyses," , 2022.
[36]
M. Burton och K. Näsén, "Simulation of load capacity of 3D printed concrete patterns," , 2022.
[37]
E. Kafková, "Study of permanent formwork made of high-performance concrete as protection of concrete with recycled aggregate," , 2022.
[38]
J. Jensen och M. Leijström, "Use of Digital Image Correlation for monitoring of concrete buttress dam failure model tests," , 2022.
[39]
Y. Vicedo, "Applications of steel-plate composite structures for nuclear modular construction," , 2021.
[40]
A. M. Osman Fadul, "Assessing the safety of cracked concrete dams," , 2021.
[41]
E. Gegerfelt och A. Hasselqvist, "Concrete in vertical slipforms : A process for determining a suitable concrete composition," , 2021.
[42]
S. Harrison och S. Nöjd, "Influence of Foundation Modelling on the Seismic Response of a Concrete Dam," , 2021.
[43]
S. Akbar och M. Carlie, "Long-term deformation of balanced cantilever bridges due to non-uniform creep and shrinkage," , 2021.
[44]
D. Lillemo, "Modelling masonry spires : An investigation," , 2021.
[45]
A. Frank och A. Fristedt, "Numerical simulations of shear reinforced concrete beams subjected to blast loads," , 2021.
[46]
S. Boned Ferrer, "Performance of 3D printed concrete formworks for bridge pillars focusing on casting," , 2021.
[47]
B. Azad, "Shear strength of prestressed concrete beams without shear reinforcement : A comparison between equations," , 2021.
[48]
A. Petkoglou, "Stability of building structures using NLFEA including second order effects : Applications with the software ATENA-GiD," , 2021.
[49]
J. CONTRERAS MORENO och K. D. GHEBREIGZIABHER, "Aeration and risk mitigation for flood discharge tunnel in Zipingpu water conservancy project," , 2020.
[50]
R. Roy, "Bacteria - based self - healing mortar with bio - plastic healing agents : Comparative analysis on quantification and characterization of self-healing by various experimental techniques," , 2020.
Fullständig lista i KTH:s publikationsportal
Innehållsansvarig:admin@byv.kth.se
Tillhör: Institutionen för byggvetenskap
Senast ändrad: 2022-02-25